• Intel® Core™ 2 Duo T9400
• Intel® MCH5100 chipset
• Support up to 16 GB SDRAM
• 4 x Mid-size AdvancedMC bays
• ICH9R SATA RAID available
• Conventional carrier according to AMC.0 R2.0
• Onboard Compact Flash socket

We suggest a unique solution that combines the computing power of the Processor blade with maximum peripheral diversity and flexibility of ATCA Carrier supporting up to 4 mid-size AMC modules.
The Processor Blade is based on the Intel® Core™ 2 Duo T9400 processor and MCH5100/ICH9R chipsets. The board contains the non-blocking Gigabit Ethernet Switch, which allows to provide maximum throughput capacity between all module nodes and BASE/Fabric Interfaces.
Availability of the Compact Flash connector allows to launch quickly the preinstalled OS on the board and configure it remotely afterwards.
Our solution for the ATCA platform can be efficiently used in different applications such as Media Gateways, Media Servers, RNC and SGSN etc.

There are two options for producing the module:
— The option with 4x AMCs provides the connection of additional and peripheral devices through RTM.
— The option with 2x AMCs allows to place the onboard SATA HDD 2.5” and the full set of the peripheral connectors (VGA, COM, USB, Gigabit Ethernet, PS/2) on the front panel.

For the ATCA-PC060 with 4x AMCs we offer the optional Rear Transition Module (RTM) designed to connect peripheral devices and additional SATA HDD to the main board.

RTM contains the following peripheral connectors:
— RJ-45, DB-9 (RS-232);
— 4x USB;
— DB-15 (VGA output);
— RJ-45 (Gigabit Ethernet connected to the HOST);
— DB-25 (LPT parallel port);
— MiniDIN-6 (keyboard and mouse);
— Onboard SATA HDD 2.5” connector.

Host

  • Intel® Core™ 2 Duo T9400 (2.53 GHz), 6MB L2 cache
  • FSB – 1066 MHz
  • Intel® MCH 5100/ICH9R Chipset

Memory

  • Two DDR2 667MHz SO-RDIMMs
  • Max capacity up to 16GB

AMC Site

  • Connectivity – Two Gigabit Ethernet interfaces
  • Connectivity – Single x4 PCI Express interface
  • Connectivity – Single SATA interface (ICH9R RAID controller)

Base and Fabric Interfaces

  • Dual star configuration
  • PICMG 3.0 base interface compliant

RAID

  • RAID level 0, 1, 5 on 4x SATA drives


To products list

External Interfaces

Front Panel (2 AMC option):
  • 4x USB 2.0
  • VGA output
  • Serial RS-232 RJ-45
  • Gigabit Ethernet from HOST
  • PS/2 keyboard and mouse

Dual System Expansion Buses

Front Panel (2 AMC option):
  • 32-bit/33MHz PCI bus; 4 PCI masters supported
  • 4x x1 PCI-e ports

Power Requirements

  • Dual-redundant -48V rail
  • Input range: 39.5 – 72 VDC
  • Typical power without AMC: 65 – 80W
  • AMC total power up to: 120W

Relevant Standarts

  • PICMG 3.0
  • AMC.0 R2, AMC.1, AMC.2 and AMC.3